|
TechSpec Overall Width (in)
|
10 |
|
TechSpec Core Type
|
N/A |
|
TechSpec Core Thickness (in)
|
N/A |
|
TechSpec Core Length (in)
|
25.7 |
|
TechSpec Core Height (in)
|
12.5 |
|
TechSpec Inlet (in)
|
3 |
|
TechSpec Includes
|
(1) Mishimoto Intercooler--(3) Front Air Diversion Panels--(1) Replacement Lower Fan Shroud--(2) Mounting Brackets w/ Rubber Isolators--(2) Aluminum Pipes--(4) Silicone Boots with Duracore Technology--(8) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty |
|
TechSpec Installation Notes
|
27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). |
|
TechSpec Pipe Shape
|
N/A |
|
TechSpec Pipe Diameter
|
N/A |
|
TechSpec Note
|
Vehicles with snowplow mounts installed may require trimming of the mounts to fit this intercooler. |
|
TechSpec Weight (lbs)
|
N/A |
|
TechSpec Outlet (in)
|
3 |
|
TechSpec Pipe Length
|
N/A |
|
TechSpec Centerline Radius
|
N/A |
|
SellingPoint01
|
Direct fit for the 2013-2018 6.7L Cummins |
|
SellingPoint02
|
Includes hot-side and cold-side intercooler pipes and boots |
|
SellingPoint03
|
Lowers AITs by 12.5-percent |
|
SellingPoint04
|
3-in mandrel-bent polished aluminum piping |
|
SellingPoint05
|
Bar-and-plate construction with cast aluminum end tanks |
|
SellingPoint06
|
76.65-percent increase in external fin surface area |
|
SellingPoint07
|
37.8-percent larger core volume than factory |
|
SellingPoint08
|
Includes new air ducts to divert air into the core and new lower fan shroud section |
|
SellingPoint09
|
End tanks strategically designed for optimal airflow |
|
SellingPoint10
|
Internal fins designed for maximum heat transfer with minimal pressure drop |
|
SellingPoint11
|
Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps |
|
SellingPoint12
|
Sleek Silver or Stealth Black intercooler options available |
|
SellingPoint13
|
Mishimoto Lifetime Warranty |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
4 |
|
OptionLabel
|
Stealth Black |
|
CARB EO Number
|
D-759-22 |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Applications
|
2013-2018 Dodge Ram 6.7L Cummins |
|
TechSpec Engine Codes
|
N/A |
|
TechSpec Chassis Codes
|
N/A |
|
TechSpec Maximum Recommended Boost Pressure (PSI)
|
N/A |
|
TechSpec Maximum Recommended Horsepower
|
N/A |
|
TechSpec Overall Length (in)
|
33 |
|
TechSpec Overall Height (in)
|
12.5 |
|
Cold Side Pipe Inside Diameter
|
3 |
|
Core Thickness
|
0 |
|
Core Length
|
25.7 |
|
Core Height
|
12.5 |
|
Core Color
|
Black |
|
Core Construction
|
Bar-and-Plate |
|
Core Material
|
Aluminum |
|
Coupler Color
|
Black |
|
Coupler Material
|
Silicone |
|
End Tank Construction
|
Cast |
|
End Tank Material
|
Aluminum |
|
Grade Type
|
Performance |
|
Hose Clamps Included
|
Yes |
|
Hot Side Pipe Inside Diameter
|
3 |
|
Inlet Diameter
|
3 |
|
Outlet Diameter
|
3 |
|
Intercooler Type
|
Air-to-Air |
|
Maximum Boost Pressure
|
0 |
|
Maximum Horsepower
|
0 |
|
Pipe Color
|
Black |
|
Pipe Finish
|
Powder Coated |
|
Pipe Material
|
Aluminum |
|
Universal Or Specific Fit
|
Specific |
