|
TechSpec Includes
|
(1) Mishimoto Charge Air Cooler Manifold--(1) Intake Manifold Gasket--(1) Manifold/Intercooler Accessory Bracket Set--(6) -6 ORB Plugs--(6) -6 ORB to 1/8-in NPT Adapters--(6) -6 ORB to 1/16-in NPT Adapters--(1) Fuel Rail--(6) Fuel Injector Blanks--(2) -8 ORB Plugs--(1) -10 ORB Plug--(2) 1/8-in NPT Plugs--(2) EVAP System Hoses--(1) Port Injection Fuel Line Kit--(1) Hardware Kit--Mishimoto Lifetime Warranty |
|
TechSpec Core Height (in)
|
6.3 |
|
TechSpec Maximum Recommended Boost Pressure (PSI)
|
60 |
|
TechSpec Core Length (in)
|
9.8 |
|
TechSpec Core Type
|
Bar-and-Plate |
|
TechSpec Overall Length (in)
|
11.5 |
|
TechSpec Maximum Recommended Horsepower
|
1150 |
|
TechSpec Overall Height (in)
|
13.1 |
|
TechSpec Applications
|
2021+ BMW M3 I6 3.0L--2021+ BMW M4 I6 3.0L--2021+ BMW M3 Competition I6 3.0L--2021+ BMW M4 Competition I6 3.0L--2019+ BMW X3 M I6 3.0L--2019+ BMW X4 M I6 3.0L--2019+ BMW X3 M Competition I6 3.0L--2019+ BMW X4 M Competition I6 3.0L |
|
TechSpec Overall Width (in)
|
2.1 |
|
Install Difficulty
|
4 |
|
TechSpec Core Thickness (in)
|
4.9 |
|
TechSpec Chassis Codes
|
G80--G82--G83--G87--F97--F98 |
|
TechSpec Pipe Shape
|
N/A |
|
TechSpec Weight (lbs)
|
N/A |
|
TechSpec Engine Codes
|
S58B30 |
|
TechSpec Note
|
Use of the included fuel rail is optional and for race-use only. The fuel rail has a tamper-proof sticker and may be removed only if the vehicle will no longer be used on the street or highway. Check local emissions regulations before removing. |
|
SellingPoint15
|
Mishimoto Lifetime Warranty |
|
TechSpec Centerline Radius
|
N/A |
|
TechSpec Inlet (in)
|
N/A |
|
TechSpec Installation Notes
|
N/A |
|
TechSpec Outlet (in)
|
N/A |
|
TechSpec Pipe Diameter
|
N/A |
|
TechSpec Pipe Length
|
N/A |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Prop 65 Y/N
|
Y |
|
OptionLabel
|
N/A |
|
SellingPoint07
|
33-percent core volume increase over stock with a 24-percent greater flow area |
|
SellingPoint13
|
Also fits X3 M/X4 M models with included EVAP plug and fitting |
|
SellingPoint09
|
Cast and CNC-machined runners accept stock O-rings or included fiber gasket |
|
SellingPoint08
|
CFD-designed lower plenum for even flow distribution and safe fueling |
|
SellingPoint01
|
Design features a robust bar-and-plate core TIG-welded to cast-aluminum end tanks, ensuring superior durability and longevity compared to plastic stock tanks |
|
SellingPoint06
|
Improves cooling without increasing pressure drop over stock |
|
SellingPoint05
|
Improves flow to each cylinder by an average of 14-percent |
|
SellingPoint02
|
Includes billet fuel rail, lines, and precision-drilled ports for port injection |
|
SellingPoint10
|
Includes harness brackets, engine cover mount, and custom EVAP lines for seamless install |
|
SellingPoint03
|
Includes PTFE -AN fuel lines that tee into stock fuel lines |
|
SellingPoint12
|
Includes two additional 1/8-NPT ports for manifold reference lines or sensors |
|
SellingPoint14
|
Patent Pending |
|
SellingPoint11
|
Plenum cutout allows easy access to oil filter without impeding flow |
|
SellingPoint04
|
Robust bar-and-plate core for IATs as low as 11-degrees above ambient |
|
Cold Side Pipe Inside Diameter
|
0 |
|
Core Thickness
|
4.9 |
|
Core Length
|
9.8 |
|
Core Height
|
6.3 |
|
Core Color
|
Black |
|
Core Construction
|
Bar-and-Plate |
|
Core Material
|
Aluminum |
|
Coupler Color
|
Black |
|
Coupler Material
|
Silicone |
|
End Tank Construction
|
Cast |
|
End Tank Material
|
Aluminum |
|
Grade Type
|
Performance |
|
Hose Clamps Included
|
Yes |
|
Hot Side Pipe Inside Diameter
|
0 |
|
Inlet Diameter
|
0 |
|
Outlet Diameter
|
0 |
|
Intercooler Type
|
Air-to-Air |
|
Maximum Boost Pressure
|
60 |
|
Maximum Horsepower
|
1150 |
|
Pipe Color
|
Black |
|
Pipe Finish
|
Powder Coated |
|
Pipe Material
|
Aluminum |
|
Universal Or Specific Fit
|
Specific |
