|
TechSpec Inlet (in)
|
1.5 |
|
TechSpec Outlet (in)
|
1.5 |
|
TechSpec Core Length (in)
|
13.54 |
|
TechSpec Overall Length (in)
|
17.2 |
|
TechSpec Core Thickness (in)
|
2 |
|
TechSpec Core Height (in)
|
27.24 |
|
TechSpec DPI
|
2703 |
|
TechSpec Overall Height (in)
|
28.4 |
|
Install Difficulty
|
3 |
|
TechSpec Rows
|
3 |
|
TechSpec Engine Codes
|
EJ205--EJ255--EJ257 |
|
TechSpec Chassis Codes
|
GD |
|
SellingPoint01
|
Large three-row aluminum core provides additional coolant capacity, substantial coolant surface contact, and optimal coolant temperatures even in the most demanding environments |
|
TechSpec Drain Plug Thread Size
|
M12 x 1.5 |
|
SellingPoint09
|
N/A |
|
SellingPoint10
|
N/A |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Fluid Capacity (gal)
|
N/A |
|
TechSpec Material
|
N/A |
|
TechSpec Applications
|
Saab 9-2X H4 (2.0L) 2005--Saab 9-2X H4 (2.5L) 2006--Subaru WRX H4 (2.0) 2002-2005--Subaru WRX H4 (2.5) 2006-2007--Subaru WRX STI H4 (2.5) 2004-2007 |
|
TechSpec Note
|
This item is for Manual Transmission vehicles. For automatic applications, please purchase optional Mishimoto Universal Transmission Cooler Kit.--Caution--The provided Mishimoto two-way cap (six-sided design) should replace the stock cap located on the expansion tank. The Mishimoto Performance Aluminum Radiator should utilize the included one-way cap (circular design with non-directional sticker).--It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected] Due to the additional thickness of our 3-row X-Line radiator, trimming the upper hose may be necessary.--For 2002-2003 Subaru WRX models built before 7/2002, remove fill neck overflow nipple and replace with 1.5875mm NPT plug provided. |
|
TechSpec Includes
|
(1) Mishimoto Radiator--(1) Mishimoto Two-Way Radiator Cap--(1) Mishimoto One-Way Radiator Cap--(1)1/16-inch NPT Plug--(1) Magnetic Drain Plug--Fan Mounting Hardware--Mishimoto Lifetime Warranty |
|
SellingPoint02
|
Full aluminum construction provides increased heat and pressure tolerance, improved heat dissipation, increased durability, and improved cooling efficiency |
|
SellingPoint03
|
Manufactured with robust TIG-welded end tanks for improved strength and extended longevity |
|
SellingPoint04
|
Increased coolant capacity directly results in improved cooling efficiency |
|
SellingPoint05
|
Now includes two 1.3 bar high-pressure caps, raising the boiling point of engine coolant to provide a safer, more efficient system |
|
SellingPoint06
|
Two-way expansion tank cap and one-way radiator cap ensure proper flow and function of cooling system to avoid overheating |
|
SellingPoint07
|
Includes magnetic drain plug to prevent metal fragments and debris from circulating in coolant system |
|
SellingPoint08
|
Mishimoto Lifetime Warranty |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Overall Width (in)
|
2.5 |
|
Fluid Capacity
|
0 |
|
Inlet Diameter
|
1.5 |
|
Outlet Diameter
|
1.5 |
|
Core Length
|
13.54 |
|
Overall Length
|
17.2 |
|
Core Thickness
|
2 |
|
Overall Width
|
2.5 |
|
Core Height
|
27.24 |
|
Overall Height
|
28.4 |
|
Core Row Quantity
|
3 |
|
Core Material
|
Aluminum |
|
Outlet Location
|
Bottom Left |
|
Down Flow Or Cross Flow Type
|
Down Flow |
|
Drain Plug Thread Size
|
M12 - 1.5 |
|
Transmission Oil Cooler Fitting Type
|
N/A |
|
Transmission Oil Cooler Included
|
No |
|
Inlet Location
|
Top Left |
|
Core Finish
|
Uncoated |
|
Drain Plug Included
|
Yes |
|
Radiator Cap Included
|
Yes |
