Pedal Commander Electronic Throttle Controller - 77-GMC-SR3-02

Have you ever noticed that old cars were more responsive? They use a cable to control the throttle, so the response is linear, the more you press the accelerator, the faster you go. Nowadays, cars use electronic throttle control. ETC has lag and a non-linear throttle curve, but we have a solution! Say goodbye to throttle lag, and hello to instant acceleration! Pedal Commander will revolutionize the way you accelerate! It is a groundbreaking GMC Sierra 3500 HD performance part that'll safely remove the throttle lag and let your vehicle's true performance shine! It is easy to install and plug and play so that you can enjoy your improved GMC Sierra 3500 HD right away. Pedal Commander does NOT increase horsepower or torque. It only helps you customize the throttle response, helping you get on the GMC Sierra 3500 HD's true power quicker. Pedal Commander offers four different modes. You can customize each mode to suit your driving style and road conditions. You can enjoy racecar-like acceleration with Sport+ mode, tear up the streets with Sport mode, have a cable-like response with City mode, or save up to 20% fuel with ECO mode! Pedal Commander tuning part does not interfere with or make changes to the ECU. That's why it is untraceable. Your vehicle's warranty stays intact when you enhance your GMC Sierra 3500 HD with Pedal Commander. Pedal Commander also has Bluetooth support and can be controlled with its smartphone application. Pedal Commander compatible and works perfectly with GMC Sierra 3500 HD's submodels: AT4, Base, Denali, SLE, SLT

Note: Pedal Commander Installation Guide:1. Let vehicle shut down for 5 minutes.2. Locate gas pedal assembly plug.3. Disconnect assembly plug.4. Plug connectors into their coordinating plugs on the gas pedal.5. Tuck cables in place so they do not affect or endanger your driving.6. Route the Pedal Commander to where you may easily access it.7. Use the alcohol wipe to clean the area you want to mount it.8. Apply the velcro to the bracket and the cleaned area.9. Insert the Pedal Commander into the bracket and you have completed the installation process.If you unplug the gas pedal without allowing the vehicles ECU to completely power off you will receive a check engine light when you start the vehicle.Please allow a minimum of 5 minutes to allow the ECU to fully turn off before installing.

Watch product video